PTFE,Teflon double layers encapsulated O-Ring with VIton or
All-inclusive fluoride plastic O-ring fluorine plastic as a
cladding material, rubber O-rings and O-ring as an
elastic spring core manufacturing all standard and non-standard
series Series O-ring. The product is the use
of special high temperature fluorine rubber and plastics, a special
process composite made of seal products, it has a rubber O-ring has
a low compression set properties, but also has a fluorine resin specific heat, cold,
oil, abrasion, weathering resistance, chemical corrosion. Fan can
be widely used in various static and dynamic seal occasions, it can
replace all conventional rubber O-ring.
All-inclusive fluoride plastic O-rings are widely used in
aerospace, automotive, chemical, petrochemical,
chemical, pharmaceutical industry, medical equipment, food industry, biotechnology, clean water,
machinery industry, sewage treatment.
Specifications: Diameter Minimum 16mm, the smallest wire diameter
2.65mm, the maximum size limit
Uses: Pumps and valves, reactor vessels, mechanical seals, filters,
pressure vessels, heat exchangers, boilers, pipeline flange, gas
Description: RD31 tetrafluoroethylene double seam coated O-ring, is
the use of PTFE Teflon sheet coated with a special process silica
or fluoro rubber inner core, there are two layers inside and
outside the ring to the joints staggered 180 °.
RD31 is RD30 upgrade products, in addition to anti-swelling
resistance than RD30, other advantages have, and higher pressure,
better flexibility, easier to install.
The main advantage
1, resistance and extremely versatile, suitable for almost all
chemical media at temperatures under normal use, PTFE only by a few
small chemical erosion in this list are not only compatible with
chemicals, such as some alkali metals, fluorine and some of the
halide is not compatible with PTFE.
When contacting PTFE, high concentrations of some chemicals will
react therewith, at elevated temperatures, PTFE will be 80% NaOH
and KOH, metal hydrides such as boric acid (B2 H6), aluminum
chloride, ammonia (NH3) and some amino acids (NH2) and imino (R =
NH) organics erosion. At temperatures up to 250 ℃, it will be eroded chronic oxidative reaction of 70% nitric acid.
If under these extreme conditions, products are also subject to
special testing. In addition to those mentioned chemicals, RD30
other chemicals typically exhibit chemical inertness.
2, applicable to a wide temperature range of -60 ℃ ~ 260 ℃, can be used in a short time high temperature 300 ℃
3, good compression resistance PTFE outer coating makes the
existence of anti-RD31 good hardening properties and resistance to
brittle, while silicone rubber or fluoro rubber inner core makes
RD31 at a high temperature of 205 ℃ can still maintain good flexibility. Test results show that the
physical properties of silicone rubber or fluoro rubber and
chemical properties of PTFE combine RD31 ring is formed, while
maintaining the properties of rubber, but also has good resistance
4, since the anti-friction PTFE Teflon low coefficient of friction
(0.29), making it the O-ring family friction force smallest
species, to reduce equipment wear and improve equipment efficiency
power and a great help and support .
5, high pressure resistance up to 35Mpa, 5 Mpa or more is
recommended to use a pressure ring type pressure ring.
6, excellent sealing durability, long life RD31 compared to any
other made of rubber or pure PTFE O-ring seal and has an
unparalleled long-life, especially in demanding media applications.
7, the average hardness moderate hardness of different materials
RD31 ring as follows:
Solid Silicone Rubber: 75-85
Solid Viton: 85-90
Hollow silicone rubber: 70-75
8, clean environment at normal temperature non-toxic, clean and
temperature resistance make it a highly food, pharmaceuticals, fine
chemicals, bio-industry and other health requirements of scientific
research, one of the producers in the field of manufacturing